Our Flir One Pro thermal imaging camera shows some noticeable differences in heat soak throughout the cooling tower itself between 50% and 100%, which is to be expected. Omitting AVX instruction sets allows for accurate, 100% loads at chosen clock speeds, while allowing AVX instructions would provide higher, albeit, unrealistic synthetic CPU loads and excessive heat production, less indicative of real-world use. 7C70v12)Ĭorsair Dominator Platinum RGB, 16GB (2x8GB) DDR4-3600ĬrystalFontz CFA-633-TMI-KU, 4x Dallas One Wire WR-DOW-Y17 sensorsĬorsair Commander Pro, 100%/50% PWM Speed profiles (liquid cooling pump always if applicable)ĭata comparisons are based on data collected from testing performed on our new Intel i9-10850K system, including re-visiting many previously covered products which were originally covered on the prior testing platform which pivoted around an i7-5930k (4.20ghz v29.4b8 (no AVX) is used for two-hour intervals, one managing fans at 50% PWM and the other at 100% PWM with RPM measurements being taken every three seconds and averaged across the duration of each two-hour capture. That means you're throttling during most compiling, encoding, decompression and some gaming scenarios.Intel Core i9-10850K LGA1200 (Comet Lake), all 10 cores 4.6Ghz 1.190v, (3.60Ghz stock speed, single core boost 5.2Ghz)
It took less than 30 secs sustained load for it to throttle at stock settings. while waiting for my NH-D15 to arrive I was running the Hyper 212 EVO from my old computer on my new 9900k. You'll never get full performance out of a 9900k with your Hyper 212 EVO. You need to dissipate around 200W of heat if you're running at 4.6 Ghz and your cooler has a TDP of 150W. You'll be throttling in any stress test with a Hyper 212 EVO on a 9900k.
Nice and quiet and good enough for me! The black looks nice had the RGB fan hooked to my ASUS mobo rolls slowly through the colors.A Noctua NH-D15 on a 9900k maxes out in the 70's degrees with no OC. With a i9-9900K and a 4.6GHz OC, I can run the fan at low speeds and have the temp max out at around 70C. It works fine as long as I don't go crazy overclocking the CPU. Johnpombrio said:I have the Hyper 212 EVO black edition which has a very similar mounting system.
0 kommentar(er)
